Freeway Enduro Pack with Fast Charger


Freeway Enduro Pack with Fast Charger

From: £221.49

You are selecting the Freeway Enduro Pack. This includes an option on the 3.4Ah battery type (Carbon or bag). This pack also includes our new Fast Rate Lithium Ion charger, You can select your preferred country mains pin below before proceeding to the checkout

  • Ideal Road Light
  • Excellent beam spread and penetration
  • Recommended for extremely long rides (contact us for software options)

Now with increased output power, Freeway is our highly featured entry level light. Recommended for road riding and commuting, this light still packs a punch. Redesigned optics and LED selection provide excellent visibility to spot pot holes and other road hazards. Extra confidence is provided by the front “glow ring” that provides side illumination to help get you seen when crossing junctions. Also now included is a DAY STROBE function – a more more intense strobe provides long distance visibility for approaching cars.


  • Fast Rate charger halves the charge time compared to standard rate charger
  • Can be configured for Audax/ultra endurance run times


SKU: FreewayEndFst Categories: ,

Additional information

Weight 1 kg


There are no reviews yet.

Be the first to review “Freeway Enduro Pack with Fast Charger”

1000 Lumens

Maximum continuous output, 1250 Lumens on Smart Boost


Only Weighs 130g

7 Power Modes

2 Strobe, 4 Continuous, 1 Smart Boost Mode

Microprocessor Controlled

Optimal LED and Battery Management


Recommended for commuting and general on road use


Can be customised for extreme run times

More Info

When coupled to one of our hard working batteries Freeway will provide many hours of run time between charges. Run times can be further enhanced for specialist applications such as Audax by a simple configuration. When in Audax mode all LED outputs are roughly halved from the published data below, with the benefit of roughly doubling the available run time per charge. This feature can be switched on and off as required by a simple input on the control switch when connecting the battery. The light will then store these settings forever in memory, until they are changed by the user.

  • Compatible with all of our Lithium Ion batteries (we recommend the Carbon type)
  • Automatic output reduction when the microprocessor detects a falling battery charge – extending ride time. This can be over ridden manually but will reduce the overall time remaining before the light switches off.
  • Latest CREE LED’s with optimised spectrum for off road use.
  • QR bracket can be extended (by use of QR links) to accommodate bars up to 37mm in diameter
  • Small enough and light enough to be used as a bar light or a helmet light.
  • New daylight strobe mode for use on road that is quite intense, making you more visible to oncoming traffic.

The run time table below provides approximate run times in each mode, actual run times may vary depending on a lot of external factors including ambient temperature and whether the light is switched between modes. The two run times provide show expected continuous run time before the light enters the automatic battery management mode, when the light enters battery management, power modes are restricted to Low and Mid powers only, the light will eventually power down to Flash 1 level, this provides a minimum of an extra 45 minutes of run time on 3.4Ah batteries (roughly 2x that for 6.8Ah batteries).

Technical Specifications

ModeFlash 1Daylight StrobeLowMidHighMaxSmart Boost
Lumen output Standard Mode751501503006001000 1250
Lumen Output Audax Mode307575150300500650
3.4Ah Battery Types Standard Mode86Hr38Hr43Hr19Hr10Hr 25Min6Hr 13Min3 Minutes (resettable)
3.4Ah Battery Types Audax Mode172Hr76Hr86Hr38Hr20Hr 50Min12Hr 26Min3 Minutes (resettable)