When coupled to one of our hard working batteries Freeway will provide many hours of run time between charges. Run times can be further enhanced for specialist applications such as Audax by a simple configuration. When in Audax mode all LED outputs are roughly halved from the published data below, with the benefit of roughly doubling the available run time per charge. This feature can be switched on and off as required by a simple input on the control switch when connecting the battery. The light will then store these settings forever in memory, until they are changed by the user.

• Compatible with all of our Lithium Ion batteries (we recommend the Carbon type)
• Automatic output reduction when the microprocessor detects a falling battery charge – extending ride time. This can be over ridden manually but will reduce the overall time remaining before the light switches off.
• Latest CREE LED’s with optimised spectrum for off road use.
• QR bracket can be extended (by use of QR links) to accommodate bars up to 37mm in diameter
• Small enough and light enough to be used as a bar light or a helmet light.
• New daylight strobe mode for use on road that is quite intense, making you more visible to oncoming traffic.

The run time table below provides approximate run times in each mode, actual run times may vary depending on a lot of external factors including ambient temperature and whether the light is switched between modes. The two run times provide show expected continuous run time before the light enters the automatic battery management mode, when the light enters battery management, power modes are restricted to Low and Mid powers only, the light will eventually power down to Flash 1 level, this provides a minimum of an extra 45 minutes of run time on 3.4Ah batteries (roughly 2x that for 6.8Ah batteries).